The primary hard water minerals are magnesium and calcium, while iron and manganese (“the stainers”) can also be found in Ogunquit water, mostly in private wells. These contaminants can be removed with a water softener and/or a properly specified sediment filter depending on whether the contaminant’s form is in solution or particulate. A water test and analysis will determine the best course of action. A water softener will improve your water greatly if you have hard water minerals, iron, or manganese in your water. If other impurities are confirmed in the water test, they can be removed with other types of water filtration systems.
WATER SOFTENER SYSTEMS
A water softener effectively removes dissolved forms of iron & manganese and hardness minerals from the water. To remove particulate iron or manganese, water filtration utilizing a cartridge filter with proper micron rating will be effective. Depending on the situation, this could require a series of filters with different size micron ratings to handle heavier levels of different sized particles in the water. Selecting an appropriate micron rating and style of filter can be determined by a water treatment professional based on water test results and other symptoms. For more information on Iron and Manganese in water, see our published articles in Water Technology Magazine at the following link: https://h2ocare.com/publications/.
Hard water interferes with many cleaning tasks, from doing the laundry to washing dishes to taking a shower. Washing your hair in hard water may leave it feeling sticky and dull. Dishes and glasses get spotted and a film may build up on shower doors, bathtubs, sinks and faucets. Clothing can look dingy and feel rough and scratchy. Hard water can also cause a residue to build-up in pipes that can lower water pressure and eventually cause corrosion and damage to water using appliances. The maximum allowable level (per the Environmental Protection Agency) for iron as a secondary contaminant is .3 parts per million and for manganese is .05 parts per million. Small amounts of these minerals can have very noticeable, even damaging affects on your home’s water quality.
The following identifies hard water levels.
OTHER AFFECTS OF IRON, MANGANESE AND HARD WATER
Scale from hard water can build-up inside water heaters insulating the temperature sensor inside the tank creating extra work to bring the temperature up to the set level. This reduces the life of your hot water heater and will likely require early replacement. Some other affects of these contaminants include corrosion and scaling inside pipes and major staining throughout the home’s showers, bathtubs, and sinks. For those using their well water for lawn irrigation, iron and manganese can cause major staining of walkways, siding and anyplace the water touches.See the link at http://lawn-irrigation/. For more information on hard water, see link at usgs.gov/edu/hardness.
RADON & ARSENIC IN PRIVATE WELLS
A water softener will not remove the health threat contaminants Radon and Arsenic which may be found in Ogunquit and will require different water filtration technologies. Arsenic in water can be removed at the point of entry into the home with tanks filled with arsenic specific resin that captures the arsenic before it can get into the home’s water supply. Point of use systems for drinking water can use reverse osmosis technology to effectively remove arsenic. Radon can be safely removed with an aeration system that agitates the incoming well water, releasing the gas from the water in a sealed chamber, then safely venting it to the outside ambient air. Speak to a water treatment professional to decide which system is right for you.