WATER SOFTENER EFFECTIVENESS
A water softener is effective in removing some of the most common contaminants found in the many private wells supplying homes in Middleton.The main contaminants are iron & manganese as well as the hard water minerals magnesium and calcium. Small amounts of these minerals can have large affects on your home’s water quality. The EPA maximum allowable levels for iron as a secondary contaminant is .3 parts per million. The EPA maximum allowable level for manganese as a secondary contaminant is .05 parts per million. As you can see, these are very small amounts, but their affects can create quite an impact. Water Softening will be very effective if you have hard water, iron or manganese in your well water.
Compare your test results to this chart:
THE AFFECTS OF IRON, MANGANESE & HARD WATER
Hard water affects include corrosion and scaling inside pipes, major staining throughout the home’s showers, bathtubs, and sinks and destruction of hot water heaters way ahead of their useful life (scale build-up inside hot water heaters can insulate the temperature sensor inside the tank causing them to work much harder to bring the temperature up to the set level). Iron and manganese in water can create rusty or black/brown staining and corrosion in the home as well. Hydrogen Sulfide is evidenced typically by a rotten egg smell in your water, however this may also be caused by high Manganese levels in the water also. A water filtration specifically for this problem is effective in correcting this. For those using their well water for outside lawn irrigation, iron and manganese can cause major staining of outside walkways, house siding and anyplace the water touches. See the link at https://h2ocare.com/lawn-irrigation/.
WHAT WILL A WATER SOFTENER REMOVE?
A water softener is effective in removing dissolved forms of iron & manganese and hard water minerals. To remove particulate iron or manganese, a cartridge filter with proper micron rating will be effective. Depending on the specific situation, this could require a series of filters with different size micron ratings to handle heavier levels in the water. Selecting the right micron rating and style can be determined by a water treatment professional based on water test results and other symptoms. For more on Iron and Manganese, see articles in Water Technology Magazine at the following link: publications.
RADON & ARSENIC IN PRIVATE WELLS
Other contaminants that may be found in Middleton well water include Radon and Arsenic. A water softener (water softening) will not remove these health threat contaminants. Radon is safely removed with an aeration system that agitates the incoming well water, releasing the gas from the water in a sealed chamber, then venting it safely to the outside ambient air. Arsenic in water can be removed at the point of entry into the home with tanks filled with arsenic specific resin that captures the arsenic before it can get into the home’s water supply. Point of use systems for drinking water can use reverse osmosis technology to effectively remove arsenic. Speak to a water treatment professional to decide which system is right for you.
Having a water test performed is a mandatory first step in the process of improving your water quality. Without a test and analysis, the most appropriate type of water softener or other water filtration system cannot be determined. For more on water testing, see the link at http://water-testing/.