WHOLE HOUSE WATER FILTRATION OPTIONS
Various types and sizes of whole house water filtration systems are available to address potential water quality issues experienced in Abington, Massachusetts town water or well water. Not only is matching the right technology important, sizing the system to meet the water usage demands of your home is also key. Additionally, a professionally plumbed system is also critical as well as maintenance of the system throughout the years to optimize the useful life and proper functioning of your new equipment. The process of determining if or what type of system you need starts with a water test.
While symptoms of water quality issues such as bad odors & taste, staining of laundry, bathroom fixtures, etc. are indicators of problems, the preferred starting point is to get a water test to identify the minerals or contaminants in the water and at what quantity they exist. This will lead to an effective system recommendation and route to providing your home with excellent water quality.
BAD ODORS & TASTES IN YOUR WATER
There are various types of bad odors and tastes that you may experience in your water. You may notice odor and taste issues if your home is supplied by town water, typically associated with Chlorine. Chlorine is used for disinfection purposes by the town to control microorganisms including bacteria and others that may be present in the water distribution system. For a more complete description of this and other potential bad odors and taste in your water, see the link at https://h2ocare/bad-odor-taste.
WATER SOFTENER SYSTEMS
A water softener is a type of whole house water filtration system that is designed for removing hard water minerals (magnesium & calcium) as well as dissolved iron and manganese from the water. For water with high levels of iron or manganese (“the stainers”), an “up-flow” water softener is recommended to prevent damaging mineral build-up in the bottom of the water softener. Also, high efficiency water softeners that are more efficient with both water and salt usage are preferred. These are self-cleaning systems that periodically go into a “backwash” cycle to knock off all the hardness, iron and manganese minerals captured by the resin beads inside the tank (and sends it to drain) enabling the resin beads to begin capturing these minerals all over again. For more on hard water see hard water usgs.