The primary hard water minerals are magnesium and calcium, while iron and manganese (“the stainers”) can also be found in Foxborough, mostly in private wells. These contaminants can be removed with a water softener and/or a properly specified sediment filter depending on whether the contaminant’s form is in solution or particulate. A water test and analysis will determine the best course of action. A water softener will improve your water greatly if you have hard water minerals, iron, or manganese in your water. If other impurities are confirmed in the water test, they can be removed with other types of water filtration systems.
Water softeners vary, including up-flow versus down-flow which can make a big difference, particularly if there are elevated levels of iron or manganese in the water.
WHAT A WATER SOFTENER REMOVES
A water softener effectively removes dissolved forms of iron & manganese and hardness minerals from the water. To remove particulate iron or manganese, water filtration utilizing a cartridge filter with proper micron rating will be effective. Depending on the situation, this could require a series of filters with different size micron ratings to handle heavier levels of different sized particles in the water. Selecting an appropriate micron rating and style of filter can be determined by a water treatment professional based on water test results and other symptoms. For more information on Iron and Manganese in water, see our published articles in Water Technology Magazine at the following link: http://publications/.
Hard water interferes with many cleaning tasks, from doing the laundry to washing dishes to taking a shower. Washing your hair in hard water may leave it feeling sticky and dull. Dishes and glasses get spotted and a film may build up on shower doors, bathtubs, sinks and faucets. Clothes can look dingy and feel rough and scratchy. Hard water can also cause a residue to build-up in pipes that can lower water pressure. For more detail on hard water, see the link at: https:/usgs.gov/edu/hardness.
Calcium and magnesium may have major affects on your home’s plumbing and your ability to clean, even though the EPA has no published limits on these. The maximum allowable level (per the Environmental Protection Agency) for iron as a secondary contaminant is .3 parts per million and for manganese is .05 parts per million. Small amounts of these minerals can have very noticeable, even damaging affects on your home’s water quality.
OTHER AFFECTS OF IRON, MANGANESE & HARD WATER
Scale from hard water can build-up inside water heaters insulating the temperature sensor inside the tank creating extra work to bring the temperature up to the set level. This reduces the life of your hot water heater and will likely require early replacement. Some other affects of these contaminants include corrosion and scaling inside pipes and major staining throughout the home’s showers, bathtubs, and sinks. For those using their well water for lawn irrigation, iron and manganese can cause major staining of walkways, siding and anyplace the water touches. See the link at https://lawn-irrigation/.
BAD TASTES & ODORS, SEDIMENT
In addition to the above systems, there are many other types of systems to remove bad tastes & odors, sediment and many other objectionable minerals and contaminants in the water. Starting with a water test will dictate the right approach. For more information on common bad odors & tastes in New England water supplies, see the link at http://bad-odor-taste/.